Metallic Foil Gel

Metallic Foil Gel (5ml) Clear gel specially created for the Mirror Effect technique that guarantees 100% adhesion on the French or the entire nail. With it you get results in a proportion of 95% of the effect of the Minx foil. It is recommended to use the metallic Craquelure Effect for Nail Art foil. Made in EU! Instructions for use: It is recommended to use the metallic Craquelure Effect for Nail Art foil, obtaining a perfect 100% adhesion on the model. Step 1: Create the surface French or the desired model (the whole nail) with a MIG colored gel in a very thin layer and as uniform as possible with brush 4. Beveled brush for surface French no. 4 as close as possible to the color of the foil that you are going to use, dry in a UV lamp for 2 min or LED for 30 sec. Step 2: Apply the Metallic Foil Gel MIG gel to the entire surface of the french or model in a very thin and uniform layer with brush 4. Beveled brush for surface French no. 4, dry in UV Lamp- 2 min. or LED – 30 sec. Step 3: After cutting the film into the required piece, apply with firm movements and without shaking by dabbing. Compulsorily use the foil on the matte side, making sure not to apply with the same place where you applied before. Step 4: Seal the nail very well with Finish Gel I MIG dry max. 1 min. in the UV lamp then apply directly on top without degreasing the second layer of Finish Gel II MIG and dry in the UV lamp - 2min or LED-30sec. respecting the instructions for use of the finish. Careful! It is recommended to find the optimal time of your lamp for drying the MIG Nails & Beauty Metallic Foil Gel if your neons have started to wear out. Do not keep them exposed to natural light, UV rays or strong heat. *These instructions are informative and are for people professionally trained in the profession of Nail Prosthetic Stylist. The information provided is valid for MIG Nails & Beauty products and may differ from those of other companies. We do not assume responsibility for the use of the products in any other way than described above. Clear Gel specially created for the Mirror Effect which guarantees a 100% adhesion of the transfer foil on the French or on the entire nail. Its results are 95% similar to Minx foil. Its recommended that you use the Metallic Craquelure Effect for Nail Art Foil Made in EU! Instructions: Step 1: Create the painted french or entire nail design with MIG Color Gel (a color similar to the foil color) in a thin, uniform layer using the no4 Angled Brush size 4. Cure it in the UV Lamp 2 minutes / LED Lamp 30 seconds. Step 2: Apply Metallic Foil Gel over the previous color in a thin, uniform layer and cure it in the UV Lamp 2 minutes / LED Lamp 30 seconds. Step 3: Cut a piece of foil and press firmly on the gel and lift it quickly without shaking it. Apply the foil with the matt side down. Step 4: Seal the nail with Finish Gel I MIG, cure for 1 minute in UV Lamp. Then apply a layer of Finish Gel II MIG and cure in UV Lamp 2 minutes / LED Lamp 30 seconds. Attention: It is recommended to find the proper curing time for the Metallic Foil Gel specific to your own lamp, depending on the usage of the UV bulbs. Do not keep the gels directly in the sunlight, UV light or high heat. * These instructions are informative and they are for professionally trained as Certified Gel Nail Technicians. All the information is valid for MIG Nails & Beauty products and it can be different from other brands. We do not take responsibility for using the products in any other way that the one described above.