Transfer Foil Gel

Transfer Foil Gel (5ml) Clear gel created for transferring the 100% foil on the french or the whole nail. It is recommended to use the metallic Craquelure Effect for Nail Art foil. Made in EU! Instructions for use: It is recommended to use the metallic Craquelure Effect for Nail Art foil, obtaining a perfect 100% adhesion on the model. Step 1: Create the surface French or the desired model (the whole nail) with a MIG colored gel in a very thin layer and as uniform as possible with brush 4. Beveled brush for surface French no. 4 as close as possible to the color of the foil that you are going to use, dry in a UV lamp for 2 min or LED for 30 sec. Step 2: Apply Transfer Foil Gel MIG gel to the entire surface of the french or model in a very thin and uniform layer with brush 4. Beveled brush for surface French no. 4, dry in UV lamp - 2 min. or LED – 30 sec. Step 3: After cutting the film into the required piece, apply with firm movements and without shaking by dabbing. Compulsorily use the foil on the matte side, making sure not to apply with the same place where you applied before. Step 4: Seal the nail very well with Finish Gel I MIG dry max. 1 min. in the UV lamp then apply directly on top without degreasing the second layer of Finish Gel II MIG and dry in the UV lamp - 2min or LED-30sec. respecting the instructions for use of the finish. Careful! It is recommended to find the optimal time of your lamp for drying the MIG Nails & Beauty Metallic Foil Gel if your neons have started to wear out. Do not keep them exposed to natural light, UV rays or strong heat. *These instructions are informative and are for people professionally trained in the profession of Nail Prosthetic Stylist. The information provided is valid for MIG Nails & Beauty products and may differ from those of other companies. We do not assume responsibility for the use of the products in any other way than described above.